118 Vs 135 Degree Drill Bit

There are a lot of factors that go into deciding which drill bit is better for a specific project. The 118 or 135 drill bit debate is one that has been around for a while and there are pros and cons to both. In the end, it really depends on the project and what the user is looking for in a drill bit.

Here’s a breakdown of the two options to help make the decision easier.

There isn’t really a definitive answer to this question – it depends on what you’re looking for in a drill bit. If you need a bit that’s going to be able to handle tougher materials, then the 135 might be a better option. But if you need something that’s going to give you a cleaner hole, then the 118 might be better.

Ultimately, it’s up to you to decide which one is going to work best for your needs.

Why Do You Use 135 Degree Split Point Drill Bit?

If you’re looking for a versatile and reliable drill bit, then you’ll want to check out the 135 degree split point drill bit. This type of drill bit is designed with a split point that helps to reduce walking when starting the hole. Additionally, the 135 degree angle provides more clearance than a standard twist drill bit and helps to reduce binding.

Overall, this makes the 135 degree split point drill bit an excellent choice for both metal and wood drilling applications.

Which is Better 118 Or 135 Degree Drill Bits?

There is no definitive answer to this question as it depends on a number of factors, such as the material you are drilling into and your personal preference. However, we will attempt to provide some guidance to help you make a decision.

118 degree drill bits are typically used for general purpose drilling in wood, plastic and soft metals. They are also good for starting holes in harder materials before switching to a 135 degree bit.

135 degree drill bits have a sharper point and are better suited for drilling through tougher materials like stainless steel or cast iron. They can also be used for precision drilling in softer materials.

So, which is better?

If you need to do some general purpose drilling, then 118 degree bits will probably suffice. However, if you’re working with tougher materials or need more precision, then 135 degree bits may be the better option.

Which Drill Bit is the Strongest?

Although, The 118° drill bit cuts more aggressively but the steeper point makes it weaker than 135°. For this reason it’s best to use the 118° drill bit on softer materials.

On the other hand, 135 degree angled drill bits are also much more wear-resistant than 118 degree angled drill bits, meaning they will stay sharp for longer and won’t need to be replaced as often.

118° drill bits are usually longer than the 135° drill bit, meaning they are not as stable as the 135°. This is why the 135° drill point angle is better suited to drilling into hard materials.

For drilling into curved or slippery surfaces, 135° point drill bits are ideal.

Which Drill Bit Set is Best?

We Recommend this IRWIN Drill Bit Set, M35 Cobalt Alloy Steel Steel, 29-Piece (3018002). With this 135-degree split-point tip, you can start drilling immediately with less force and it will eliminate “walking” across the work surface.

And when it comes to 118 Degree Split Point Angle Drill Bit, Yaetek 25-Piece Twist High Speed Steel Drill Set is becoming really popular.

How Do You Sharpen a 135 Degree Drill Bit With a Drill Doctor?

If you’re looking to sharpen a 135 degree drill bit with a drill doctor, there are a few things you’ll need to keep in mind. First, it’s important to understand that the135 degree angle is only for the lip of the drill bit- the point of the bit will remain sharpened at a 90 degree angle. With that in mind, you’ll want to start by setting your Drill Doctor to sharpen at a 135 degree angle.

Once your Drill Doctor is set up correctly, begin sharpening your bit by following these steps:

1. Insert the dull bit into the chuck and tighten until it’s secure.

2. Slowly bring the spinning chuck down to touch the grinding wheel.

3. Apply light pressure as you move the bit across the grinding wheel until it’s been fully sharpened.

4. Remove the now-sharp bit from the Drill Doctor and test it out!

What is the Best Angle for Drill Bits?

It is a common question when starting a new project, what is the best angle for drill bits? When it comes to deciding on the perfect angle for your needs, there are many factors that come into play such as the type of material you’ll be drilling through and the size of the hole you need to create. In general, however, there are three main types of angles used for drill bits: 135 degrees, 118 degrees, and 90 degrees.

The most commonly used angle is 135 degrees because it provides good penetration without putting too much stress on the bit. It’s also a good choice for drilling through tougher materials. If you’re working with softer materials or need to create larger holes, then 118 degrees or 90 degrees may be better suited for your needs.

Again, it really depends on the project at hand so experiment with different angles to see what works best for you.

Conclusion

There are a few factors to consider when deciding which drill bit is better for your project. The 118 drill bit is good for general drilling, while the 135 drill bit is better for precision drilling. If you need to drilled a lot of holes, then the 135 drill bit will be faster and easier to use.

However, if you only need to drilled a few holes, then the 118 drill bit will be more than sufficient.

As an Amazon Associate I earn from qualifying purchases.

Leave a Comment