A split point drill bit is a type of drill bit that has a split point at the tip. This type of drill bit is used for drilling in metal and other hard materials. The split point allows the drill bit to start drilling faster and with less pressure than a standard drill bit.
This type of drill bit is designed to start drilling on contact, without the need for a pilot hole. Split point drill bits are used in a variety of applications, including woodworking, metalworking, and concrete drilling.
What Does a Split Point Drill Look Like?
Drill bits come in a variety of sizes and shapes, each designed for specific tasks. Split point drill bits are no exception. These specialized bits are designed for use in materials that tend to clog conventional drill bits, such as stainless steel.
Split point drill bits feature a split point tip that helps to prevent the bit from walking or slipping when starting the hole. The split point also creates two cutting edges that help to clear chips more effectively and keep the bit cooler during extended use.
While split point drill bits are more expensive than standard bits, they can be a worthwhile investment for anyone who regularly works with difficult-to-drill materials.
Split Point Vs Standard Point
The split point drill bits do not require as much cutting force as other points. Besides, they provide better chip removal. On top of that, the split point is self-centering and therefore predrilling is not required in the majority of drilling applications. But you don’t get to see that in the standard drill point,
What is the Angle of a Drill Bit Tip ?
The angle of a drill bit tip is the angle between the cutting edge of the bit and the centerline of the shank. The most common angles are 118 degrees and 135 degrees, but bits with other angles are also available. The angle determines how aggressively the bit will cut, with smaller angles providing more aggressive cutting action.
135 Split Point Drill Bits
If you’re looking for a versatile drill bit that can handle a variety of materials, the 135 split point drill bit is a great option. This type of drill bit has a split point tip that helps to prevent walking, and it’s able to drill through metal, wood, and plastic with ease. The 135 degree angle on the tip also provides more control when drilling, so you can avoid making mistakes.
When shopping for a 135 split point drill bit, it’s important to consider the material you’ll be using it on most often. If you plan on drilling through metal frequently, look for a bit that’s made from high-speed steel or cobalt. These materials will stand up to repeated use and won’t dull as quickly as other types of drill bits.
If you’ll be using your drill bit primarily on wood or plastic, however, any type of high-quality Drill Bit will do the trick. No matter what material you’re working with, always start with a smaller diameter 135 split point drill bit and work your way up to the larger sizes as needed. This will help prolong the life of your drill bit and make your drilling projects go more smoothly overall.
With just a little care and attention, your 135 split point Drill Bit should give you years of dependable service!
Split Point Drill Bit Set
If you’re looking for a reliable and affordable split point drill bit set, look no further than the ones offered by Dewalt. This DEWALT Drill Bit Set, 21-Piece, 135 Degree Split Point (DWA1181) includes bits that are made of high-speed steel with a black oxide finish. They come in sizes from 3/32″ to 1/2″, and they have a 135-degree split point tip that’s ideal for drilling on both metal and wood surfaces.
The set also comes with a handy storage case, so you can keep your bits organized and protected when not in use.
How Do You Use a Split Point Drill Bit?
If you’re looking to make clean, precise cuts in wood, then you’ll need to invest in a good quality split point drill bit. Split point drill bits have a small point at the tip that helps to prevent the bit from walking across the surface of the material as it’s being drilled. This type of drill bit is also less likely to cause kickback when drilling.
To use a split point drill bit, start by marking out where you want to make your hole. Then, using a handheld or table-mounted drill, slowly and carefully drill into the wood until you reach your desired depth. Take care not to over-drill, as this can damage the material.
With practice, you’ll be able to create clean, professional-looking holes with ease!
Can You Sharpen Split Point Drill Bits?
If you’re using a split point drill bit and find that it’s not performing as well as it used to, you may be wondering if you can sharpen it. The answer is yes, you can sharpen split point drill bits. However, there are a few things to keep in mind.
First, when sharpening a split point drill bit, it’s important to only remove a small amount of material. If you remove too much material, you’ll end up changing the geometry of the bit and potentially making it less effective.
Second, pay close attention to the angle at which you’re sharpening the bit.
Split point drill bits are designed to have a specific angle on the tip, and if you change that angle when sharpening, it can again make the bit less effective.
Finally, make sure your sharpening tool is very clean and free of any debris before starting. Any debris on your sharpening tool could end up embedded in the tip of the drill bit, making it less effective.
With those things in mind, here’s how to sharpen a split point drill bit:
1) Use a fine-grit abrasive (600 or higher) on your sharpening tool. Coarser grits will remove too much material and change the geometry of the tip too much.
2) Hold the split point drill bit so that the cutting edge is perpendicular to your sharpening tool (at a 90 degree angle). This is critical – if you don’t do this step correctly, you risk changing the angle of the tip and making the drill bit less effective.
3) Slowly move the Sharpie along the length of the cutting edge while applying light pressure to grind away any dullness or damage on the edge .
Be careful not to move too quickly or apply too much pressure , as this can overheat and ruin the temper of your drill bit metal .
4) Check your actions frequently by running your finger along –if you feel any roughness then stop and start over . You want a smooth , even edge all around before moving onto
5 ) Wipe away any filings or other debris from both the Drill Bit itself as well as the surface of your workbench with a clean shop towel before continuing onward .
If you’re looking for a reliable, easy-to-use drill bit sharpener, the Drill Doctor is a great option. This handy tool can sharpen both standard and masonry drill bits, and it’s suitable for use with drills of all sizes. The Drill Doctor is simple to set up and use, and it produces consistent results, so you can keep your drill bits in good condition and extend their lifespan.
Our Recommendation is to go with this Drill Doctor DD750X 750X Drill Bit Sharpener.
Split Point Drill Bit for Metal
If you’re looking for a drill bit that can handle metal, the split point drill bit is a good option. This type of bit has a split point tip that helps to prevent walking, or moving, when you start drilling. It also provides more control and accuracy when you’re drilling through metal.
The main advantage of using a split point drill bit is that it’s less likely to wander off course when you’re starting to drill. That’s because the split point creates two cutting edges that help to keep the bit on track. And if your drill does wander off course, it’s easier to re-align the split point so that you can continue drilling without having to start over from scratch.
Another advantage of the split point tip is that it helps to reduce heat build-up. That’s because there’s less friction as the bit cuts through the metal. So your drill bits will last longer and stay sharper when using a split point tip.
If you’re working with thin materials, like sheet metal, then a regular twist drill bit can work well. But for thicker metals, or harder metals, like stainless steel, the split point Drill Bit is ideal. It will make quick work of even the toughest drilling jobs while helping to prevent damage to your material and bits.
A split point drill bit is a type of drill bit that has a split point at the tip. This type of drill bit is used for drilling in hard materials, such as metal. The split point helps to keep the drill bit from walking across the surface of the material being drilled.